Pylox Spray Paint 400cc
Pylox Spray Paint is a modified acrylic-based aerosol paint that is specially formulated for decorative and protective purposes. It is suitable for both interior and exterior surfaces
- Excellent Colour Retention
- Multipurpose
- Ozone-Friendly (CFC-free)
Benefits
- Extremely fast curing
- Good adhesion on various surfaces
- Good film properties
Features
- Easy application
- Non-toxic
- Excellent colour uniformity
- Washable
- Gloss finish comes in a wide selection of colours, available in metallic, pearl, silver and gold colours
- Fluorescent range glows brilliantly when struck by sunlight and effective over a year. This effect is able to last longer when used indoors
Finish
- Matt to Gloss
Application
METHOD:
Spray
THEORETICAL COVERAGE:
Wood surface – 0.4 – 1.0 m2 / 400cc (3 passes per coat)
Metal surface – 0.8 – 1.6 m2 / 400cc (3 passes per coat)
DRYING TIME:
Hard Dry – 30 minutes at 30°C
SPRAY APPLICATION:
– Shake container vigorously for at least 30 seconds before use
– Hold can approximately 30 cm from the surface to be sprayed on
– While spraying, keep can in horizontal motion so that coating is deposited evenly. Do not permit paint to build up
– Spray several thin coats, instead of one heavy coat, and allow each coat to cure for at least 10 minutes
– For Fluorescent range, if the surface is not white-based, a coat of Pylox White is recommended to bring out the fluorescent effect
Surface Preparation
Steel
The surface must be clean and dry, free from grease and oil prior to the application. Sand to improve adhesion
Light Metal and Alloys
Chemical treatment is necessary prior to the application. Sand to improve adhesion